[AH]

I am trying to take a T18 out of an 87 Cherokee, 4.0L motor and put it in a 91 Wrangler with a 4.2L motor. The Cherokee had the Peugeot tranny originally and we used an Advance Adapter bell housing to make the switch. So. What do I need to do to make this conversion? The bell housings look the same, but the input shaft out of the Cherokee is shorter than the AX-15 input shaft that is coming out. (the difference is about an inch)?

 

[gripguru]

cant seem to find the answer, but some information:

http://www.novak-adapt.com/knowledge/ford_to_amc.htm

http://www.novak-adapt.com/knowledge/t18_t19.htm

cannot determine from your post if you have a ford t18 or the jeep one, but if you have the jeep and it is mounted with the AA adapter, then it should work??? Do you have the original bellhousing, that may help too.

 

[cajack]

Bell housings should work. the item you need is a special pilot bushing. Try Advance Adapters for the part. Everything else should work fine.

 

[AH]

Thanks for the information. Looks like it should work.