[blt2krl]

Has anyone done This? I have some plans I got off the internet on how too. It involves tapping threw the end plate and top plate. Both are AL. I was thinking of tapping into the box itself instead of the AL plates. Just curious if anyone has some pics to share or info. :thumb:

 

[Sandman]

I have done lots of research on this. It is easier to tap the plates but the end plate needs to be reinforced as its thin. I was able to find a good ram and hoses locally (special order) for a decent price. By the time the work was done though, You can check out this place:

West Texas Offroad

This is the guy in the Yellow Jeep who kept me of the rocks on Upper Hell. :thumb:

 

[BOWTIE]

matt, over at WTOR is the one that will take care of all your needs.

i did the assist with my truck and you wouldn't believe the difference.
i managed to save some cash and tapped my own box:

and i just bought the 1.75 ram from matt..

 

[BOWTIE]

basically doing it that way involves taken apart the box itself and i would do it if i didn't have another box to try it on. i had my old 4x4 box that i used as a test pig. after i was certain wher to drill and tap i did it to my 2wd box.

not sure if you read this, but this will give you some info where to tap
http://www.pirate4x4.com/tech/billavista/HydroAssistTap/index.html