Off Road Forums On Planet4x4 banner
1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Hey guys I had a few questions. I want to do a simple 2 inch lift on my 93 ranger and I dont want to spend that much money. My plan was to get some coil spring spacers and blocks for the rear leaf springs. I can get both for 2" but my question is, will the stock shocks work? Also somebody left a review about the spacer and says you will need a 2" drop bracket. Were can I find that drop bracket?

And yes I will also be putting some spacers behind my wheels and getting my truck slightly wider also. 1.7 inches each side to be exact.
 

·
Registered
Joined
·
183 Posts
you don't need the brackets for 2", but over 2" you will. if you want the bracket you can find them at jcwhiteny or a place like that. stock shocks will work but will limit flex. it already has a block in the rear if it's 4x4, not if it's 2wd. go with belltech 6400 shackles they are 2" lowering shackles for a 88-98 chevy c1500, but it will give you 1.5" of lift in the rear and flex.
 
1 - 2 of 2 Posts
Top