Off Road Forums On Planet4x4 banner

My 90 Yota

3K views 17 replies 8 participants last post by  jeffbland 
#1 · (Edited)
so here is where i am at what do you think?









still left is the front hydro steering ram on the way
cage the truck
brake lines
drivelines
exhaust
then i can drive test it.:thumb::flipoff:
 
See less See more
3
#3 ·
Looks great! I like the one tons.:drool: What do you got for the rest of the specs?
 
#4 · (Edited)
90 toy excab obviously
42" iroks on home made bead locks
dana 60 front w/ arb 6.17 gears
dana 70 rear welded 6.17 gears
22re with intake w56-c trans w/dual t-cases marlin adapter.
onboard air by stock ac pump
triple shifter home brew
half doors
full hydro steering (Ram On its way)
(yet to come)
winch
full exo cage
ufo underlights :thumb:
budbuilt crossmember with 2" from stock lift
full hydro steer (ram in shipping right now)
tie rod
stainless brake lines
 
#7 ·
well i have a update with pics last couple of months i have been busy at work so haven't got to my rig that much but have made a few things. i have made my truck some front shock hoops. Got my hydraulic steering done and made me a crossmember. here is the pics

Here is the rear of the crossmember



Here Is The Side


Here is the underneath



Here is the mounts i made



here is my steering





well there is some updates.
 
#11 · (Edited)
thanks roksqrl i had to do that so my shifter would get messed up from the tcase and mount flex. i have also changed my shifter look in my trock to here is a updated pic of the shifters that i have built for my truck and a budies truck. it is a lot easier to make this way and it seals it really good.

 
#13 ·
:drool: :drool: :popcorn:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top